ULTRA BRIGHT & NINE LIGHTING MODES: bike tail light have 30 high-end LED lights, up to 90LM brightness and 120 degrees visibility to ensure that you can be seen from 150ft away both during the day and night. Total nine lighting modes of the bicycle rear light can be quickly switched through the remote control on the handlebar: steady with full brightness/low brightness, fast/breathing/flowing flashing, alternate fast/slow flashing, turn left/ right.
GROUND WARNING LINES & AUTOMATIC BRAKE LIGHT: This advanced and intelligent bicycle taillight can emit two red ground warning lines when riding according to your needs, providing the rider with a virtual lane and warning any vehicles that might approach. The automatic brake light will highlight with fast flashing for 12 seconds when braking to remind the vehicles and the pedestrians behind you to react in time.
IPX6 WATERPROOF & USB RECHARGEABLE: Using a sealed aluminum shell, the bike rear light is sturdy and durable. Upgraded IPX6 waterproof level can effectively prevent the damage from water when ride in the rain. Built in a 2500mA rechargeable battery, which can be charged from a power bank, laptop or any device with a USB port. The bike back light can keep running for 5-10 hours after being fully charged (depends on the light mode you use).
SUITABLE FOR MULTIPLE DEVICES: Equipped with two upgraded mounting brackets, which meet the conditions for riding on rough roads. The bike turn signal light can be easily installed under the saddle/on the tube of almost all type of bikes: road bike, mountain bike and etc. If you want to install the bicycle tail light on the skateboard, motorcycle, , dirtbike or other devices, please confirm it with seller via Amazon message before purchase.
BUY WITH CONFIDENCE: We accept returns within 30 days without any reason and offer the replacement of this bike light or accessories within one year. Please contact us in case of any issues and we will resolve them ASAP to your 100% satisfaction. WHY CHOOSE OUR CUTE EYE BIKE TAIL LIGHT?
High Brightness
Multi Lighting Modes
High Waterproof Grade
Long Battery Life
Ultra Bright Bike Taillight
30 high-end LED lights
90 lumens output
120?? wide angle red beam
Our bike taillight can provides superior daytime visibility and make you more visible for other road users.
Automatic Brake Light
Automatically high light with fast flashing when decelerating, ultra-bright for 12 seconds warning back rider.
The light mode will be restored to the original light mode (before the brake light) after flashing for 12 seconds.
Ground Warning Lane
The two ground warning lines will be projected on both sides of the bike light to attract attention to improve safety and expand your safe riding range. Two modes are available:
Steady
Flashing
Automatic Turn Off
After half an hour of no motion detected, the bicycle taillight will automatically turn off to save the battery power.
You need to long press the on/off button on the taillight again to turn on it on the next ride.
Updated IPX6 Waterproof
Made of an waterproof sealed aluminum shell, it can effectively protect this bike rear light from rain damage.
Please close the USB charging cover tightly when using in the rain to prevent water from entering the charging port.
Long Battery Life
USB rechargeable design make sure this bike back light can be quick charged from any device with USB port, keep running for 5-10 hours after fully charged.
Please use the original USB cable to fully charge it before using it for the first time.
PACKAGE CONTENT
1* CUTE EYE Bike Taillight
1* Remote Controller
1* Seat Post Mount Bracket
1* Saddle Rail Mount Bracket
1* Taillight Retaining Clip
2* Rubber Band
2* Rubber Gasket
3* Screws
1* Charge Cable
How to Replace the CR2032 Battery of the Remote Controller?
1. Open the battery cover by pulling the plastic tabs on both sides under the remote control.
2. Remove the old battery and put in the new CR2032 battery.
3. Put on the battery cover and fasten it.
4. Replace the battery completed.
Here are some notes when using this CUTE EYE Bike Taillight:
1. Please long press the button on the taillight to turn on it before every use, only in this way then you can use the remote to control the taillight.
2. Long press the middle button of the remote control can turn off the taillight, but long press this button again can??t turn on the taillight.
3. There is a red indicator light below the button of controller, it will light and indicate the current working mode of the tail light.
4. The taillight will automatically turn off after half an hour of inactivity, please long press the ON/OFF button again to turn on the taillight.
5. We suggest you to turn off the bike taillight after every ride for save battery power.