ULTRA-BRIGHT LED BIKE TAIL LIGHT: X5 bike tail light have 30 high-end LED lights and the brightness up to 85 LM, it??s bright enough to be seen from 150ft away in foggy/rainy day or even in dark night.
WIRELESS REMOTE CONTROL: Installed it on the handlebar, easy to switch the lighting modes of the bike rear light by press the four buttons on the controller. Total six lighting modes: (Steady with full brightness/ Fast Flash/ Flowing Light/ Turn Left/ Turn Right/ Ground Line).
AUTO BRAKE LIGHT & GROUND WARNING LINE: The light will highlight to remind the cars and pedestrians behind you when braking. Unique ground warning lane warns any possible incoming vehicle, providing riders with their own virtual lanes to further increasing visibility.
USB RECHARGEABLE: Built-in a 2000mAh rechargeable battery, keep running for 5-10 hours under the flashing light mode after fully charged. The remote controller equipped with a CR2032 replaceable coin cell battery and it can keep working for 12 months.
BUY WITH CONFIDENCE: We accept returns within 30 days without any reason and offer the replacement of products or accessories within one year. Please feel free to contact us if you have any problems, we will do our best to help you. X5 Bike Taillight with Wireless Remote Control
Have you ever own a smart bike tail light with automatic brake light? Just like a car back taillight, but it is cheaper and smaller?
A smart wireless remote control on bicycle handlebar that you can choose left/right turning, emergency flashing, dual side ground warning line on the ground to alarm the cars or pedestrians to keep a safety distance from you. Such a cool & smart bike tail light will help you catch more attention at night to keep you safe!
How to turn off this Ambient Light Detection function if you don??t need it?
Method 1: Please cover the sensor at the bottom of the bike taillight with black tape.
Method 2: Please long press the power button on the taillight for 3s when charging till a group of LED lights in the middle of the taillight flashes. After repeating the step, this function will be turned on again.
Ground Line Alert
After pressed the “Ground Line” button on the remote control, the two wings of the bike taillight will project two ground warning lines, which will alert other vehicles and pedestrian to expand your safe riding range.
IPX4 Waterproof
Made of an waterproof plastic casing, it can effectively protect this product from rain damage.
Note: It may not be suitable for use in heavy rain, please plug the USB cover if use in the rain.
USB Rechargeable
No more hassle of changing batteries. Just connect the rear light to your power bank, car changer, or AC outlet adapter for a quick charge.
Please use the original USB cable to fully charge it before using it for the first time.
Package Content
1* X5 Bike Taillight
1* IR Remote Controller
1* Tail Light Holder
1*Mounting Bracket
1* Rubber Strip
1* Rubber Band
1* Charge Cable
How to Install the Bike Taillight and Remote Control?
Install the Taillight on the Bike Pipe
Install the tail light holder on the seat tube and use a screwdriver to tighten the screw.
Insert the taillight into the tail light holder.
Install the Taillight under the Bike Saddle
Insert the taillight into the mounting bracket, put screws through the hole and put them under the bike saddle.
Install the Remote Control on the Handlebar
Use the rubber band to fix the remote control on the handlebar
;